That's quite something midibob, thanks for sharing!
How much do the daughterboards go for?
How much do the daughterboards go for?
30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Show posts MenuQuote from: EDWARDEFFECT1 on August 10, 2013, 03:52:31 PMVerify the output section by running the send from the Traynor into the return of the Polytone.
i powered up the amp and ran a chord from the Polytone send to a traynor 20 watt amps return and the volume is low.must be a preamp problem.i need to verify the output section the same way as the volume is lower than what i had previously.
Quote from: DckTech on June 17, 2013, 10:40:05 PM
Replaced the original "1122" reverb tank with a "P-MOD-4AB3C1C" = best spec I could find to equal original.
Quote from: markorock37 on May 10, 2013, 01:21:20 PMWe need to know the AC voltage at the wires that attach to P8 and P9. Not DC voltage, and not at P8 or P9.
Transformer wires are correct. No voltage on P8 or P9 to ground unplugged.