Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

March 28, 2024, 12:53:12 PM

Login with username, password and session length

Recent Posts

 

Hartke HA5000 biasing

Started by markorock37, June 06, 2023, 02:29:18 PM

Previous topic - Next topic

markorock37

I have a HA5000 on the bench. After checking the bias at TP1 on both modules, I have one at 36mv and the other at 91mv. Anyone know what the recommended setting is for this amp?

g1

Can you post the correct schematic for your unit?
Otherwise there is no way to tell what TP1 is.

Off the top of my head I would say to go with the lower reading for both channels, unless you see crossover distortion.

Tassieviking

I can't see TP1, but I think I have the correct schematic.
There are no stupid questions.
There are only stupid mistakes.

markorock37

That's the schem I have also.