Thanks Phil.
Yep. Plugging into the power amp input, signal clean as a whistle. Nice way to quickly eliminate suspect components.
Next step replacing all electrolytic caps on the preamp board, and the logic board as well, for good measure.
16 in total:
1 16V 100uF
2 16V 10uF
7 25V 10uF
6 50V 1uF
Yep. Plugging into the power amp input, signal clean as a whistle. Nice way to quickly eliminate suspect components.
Next step replacing all electrolytic caps on the preamp board, and the logic board as well, for good measure.
16 in total:
1 16V 100uF
2 16V 10uF
7 25V 10uF
6 50V 1uF