Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: autir on March 23, 2010, 09:53:18 PM
I hope I write in the proper subforum.
Does anyone have a schematic of the Marshall MS-2? I have searched everywhere in the site, including the links to other sites, but found nothing.
Marshall MS-2 was wildly discussed at diyAudio.com forum a while ago I remember. The only time I've seen that schematic on the internet, so I saved it then. Don't know if I'm allowed to post it here, so try to stop me.
...btw because the chip KIA6123, used in MS-2, turned out to be hard to find and also got bad feedback. Some guy at diyAudio.com came up with a MS-2 adapted for LM386. I don't remember if it ever got verified, but I post it here anyway.
Thanks :-)