Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

December 09, 2022, 05:12:31 AM

Login with username, password and session length

Recent Posts

 

12w Marshall

Started by Tassieviking, July 22, 2022, 01:39:40 PM

Previous topic - Next topic

Tassieviking

I started to looking into building a 12 watt Marshall by mixing all the 12watt Preamp circuits I found, and also mixing the 12 watt and a 30 watt amp circuit in Marshall amps so I could make any one of the 12 watt amps with 12 to 30 watts output on the same PCB. You just had to pick the right components to make the version you wanted.
Some 12 watt amps had a Bias pot and some did not. Mk1 preamp has diode clipping and the later ones dont, etc.

I got derailed when my dad got sick, traveled from Tassie to northern NSW (Australia) and spent 4 weeks with him. Had to go back to Tassie for medical reasons and be with my family for a week, then back as dad passed away as soon as I left, stayed 5 weeks then back home for Doctor visit and now I am going back up to pack what I want to keep and sell the rest, sell houses, cars,  etc.
I am going to sort all my stuff nice and neat when I get a chance because its hell trying to go through your parents stuff when they are both gone and everything is all over the place.

Anyway, this is as far as I got on a 12 watt amp before the wheels fell off.
I was going to post the KiCad files  of the PCB when I finished and still might when or if I get back to it. I put a jumper on the board if reverb is not wanted, and a place for effects to be inserted which can be bridged if not wanted.
I made the PCB so TO3 transistors had to be wired in or TO247 can be used on PCB.


There are no stupid questions.
There are only stupid mistakes.


joecool85

Great work!  I split the topic though and made this it's own so it can be an easy resource for others later.
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

Tassieviking

I have finally gotten back home a week ago and had some time to  work on this PCB, I can't guarantee it's correct but I will order some PCB's for myself later this year to test.

I decided to squeeze in a 9V regulator for pedals as its a smaller amp and is good for practice and learning on, and it cant hurt to be able to run a pedal or two from the amp.

I have made the Gerber files for JLCPCB to make the boards, but feel free to use the project any way you want.
I am going to use the KiCad schematic to make a pedal eventually as well, without the reverb circuit (unless I can get the correct mini spring pan).
There are no stupid questions.
There are only stupid mistakes.

Tassieviking

If you want to see the pictures larger, right click on the small picture and select open in new window, this makes the picture really large.
There are no stupid questions.
There are only stupid mistakes.

joecool85

If I could like this more than once, I would!  Please share results when you get a chance to build it.  I'd love to hear it play too!
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

Tassieviking

Slowly making progress, I got some PCB's made so I can test make some.
I ordered the PCB's from JLCPCB and picked the cheapest shipping, I have too many other things going on so I was in no hurry to start.
They got to me faster then I thought so now I have to get some components I don't have on hand.

I also found a circuit for the 12 watt Bass amp so I modded the PCB so that can be build as well as all the other 12 watt Marshall circuits I found.You cannot view this attachment.

I made a PCB for a front panel as well, I always wanted to try that out.

I also got some Sound Lab L4 Bass pre-amp PCB's made for an experiment, I don't know if they will work or not but I added one  LM13700 chip instead of a CA3080 and a CA3094 as original. I am to lazy to breadboard the whole pre-amp to try it out because it is so bloody big.
 
There are no stupid questions.
There are only stupid mistakes.

joecool85

Quote from: Tassieviking on November 10, 2022, 04:38:11 AMSlowly making progress, I got some PCB's made so I can test make some.
I ordered the PCB's from JLCPCB and picked the cheapest shipping, I have too many other things going on so I was in no hurry to start.
They got to me faster then I thought so now I have to get some components I don't have on hand.

I also found a circuit for the 12 watt Bass amp so I modded the PCB so that can be build as well as all the other 12 watt Marshall circuits I found.You cannot view this attachment.

I made a PCB for a front panel as well, I always wanted to try that out.

I also got some Sound Lab L4 Bass pre-amp PCB's made for an experiment, I don't know if they will work or not but I added one  LM13700 chip instead of a CA3080 and a CA3094 as original. I am to lazy to breadboard the whole pre-amp to try it out because it is so bloody big.
 

Awesome! Stoked to see this come together!
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

phatt

Brilliant work TassieV,
Can I ask how much this has cost you so far?
Of course one would still have to add the cost of a Chassis and a Cab for a complete build.
Phil.

Tassieviking

I'm not sure how much this one cost.
10 off 12 watt PCB's  US$ 11.40
10 off 12 W front facia PCB's US$ 18.60
5 off Lab Series L4 PCB's US$ 8.00
Shipping cost US$ 23.10

I have most of the components, but I had to order some pots and transistors for them.
I also bought a toroidal transformer for the Marshall 12 watt, 30V CT 50VA.


There are no stupid questions.
There are only stupid mistakes.

joecool85

Quote from: Tassieviking on November 12, 2022, 09:30:27 AMI'm not sure how much this one cost.
10 off 12 watt PCB's  US$ 11.40
10 off 12 W front facia PCB's US$ 18.60
5 off Lab Series L4 PCB's US$ 8.00
Shipping cost US$ 23.10

I have most of the components, but I had to order some pots and transistors for them.
I also bought a toroidal transformer for the Marshall 12 watt, 30V CT 50VA.




+1 for the toroidal!
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com