Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - A7

#1
I'm using the same speaker and speaker cable that I use with my Kustom amp so I know it's good. I've got some good pictures will try to figure out how to post them you'll see this amp is very clean inside.
#2
Quote from: g1 on May 22, 2022, 01:28:37 PM
Quote from: A7 on May 21, 2022, 07:16:41 PMI'm sorry when I said line out, I meant the line to the speaker.
So what did you mean by 'moved' in the first post?  If you mean just wiggling the wire going to the speaker makes a buzz come and go, then that sounds like a bad connection.

Yes no sound, but if you move the cable you hear the buzz and then nothing. Is it possible the amp output jack is bad or just oxidized?
#3
Will give it a shot, there are no amp techs within 100 miles so I'm on my own.
#4
Quote from: phatt on May 20, 2022, 08:38:28 AMAny lights come on?
You really need to add a bit more info.

Please connect speaker to speaker output,, line out is not for speaker.
Phil.
hope you see my reply I have to get used to this system
#5
I'm sorry when I said line out, I meant the line to the speaker. The power light comes on and there is a boink sound. That's it. Everything is clean inside and all solder joints look good. I really have know idea what to look for.
#6
Amplifier Discussion / Road 220 malfunctions
May 18, 2022, 07:35:37 PM
Pulled out my old Road 220 plugged in and nothing. If you move the line out to the speaker you hear a buzz then nothing. Any ideas?