Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - argenta

Pages: [1]
1
Honey Amp / Re: Thoughts on my new Honey Amp
« on: August 02, 2021, 06:05:35 AM »
Hi there, I am interested in the Honey Amp kit. Where can I purchase please?
Cheers
Rhea

2
Amplifier Discussion / Re: DIY solid state amp kits?
« on: July 04, 2021, 09:03:15 PM »
Wish I could post pictures. It would so help answer your questions. I have the original circuit diagram. I can't tell what the wattage is. I would hazard that the voltage rail is 12-15V.

3
Amplifier Discussion / Re: DIY solid state amp kits?
« on: July 04, 2021, 08:59:27 PM »
I plan to keep the transformer from power supply,and the reverb. Everything else to be rebuilt.

4
Amplifier Discussion / Re: DIY solid state amp kits?
« on: June 27, 2021, 11:23:16 PM »
I'd post pictures but is more trouble than it's worth. Anyway - the amp. Two channels,each with two inputs, volume control and tone. Then reverb, intensity and speed. Small reverb tank, and two eight inch speakers. power supply, pre amp and power amp all on  one board. Tried to get the board reprinted, but came back nothing like the original. So just looking to put something in there.

5
Amplifier Discussion / DIY solid state amp kits?
« on: June 21, 2021, 10:02:52 PM »
Hi all. Customer brought in an old Dynamic solid state which looks like its had one mod too many. Don't want to give up on it, so wondering if I can lay hands on a solid state amp kit? Ideas? Cheers
Rhea.

6
Amplifier Discussion / Amp Input Jacks
« on: February 03, 2021, 08:24:09 PM »
Hey all. Doing up a little Fender Harvard Reverb Solid State Amp. The input jacks were rusty, so decided to replace them. So I rewired them, like the original (or so I thought) and input 1 is silent and input 2 buzzes quite loudly.
I have wired as follows:
Input 1 Lug 1 +ve (red wire)
Lug 2 Ground (Shield) also to Lug 3.
Lug 3 to Lug 3 input 2
Lug 2 to Lug 1 input 1
Lug 1 Black wire.

I am certain in copying the original I have gone awfully wrong.
Appreciate ideas and help.
Cheers :dbtu:

7
Amplifier Discussion / Re: Woodstock GX-55R SS Amp
« on: August 13, 2020, 06:51:31 AM »
For some reason I can't post the photos. It keeps telling me there's an error - file of the same name uploaded. Most off-pissing.
 >:(

8
Amplifier Discussion / Woodstock GX-55R SS Amp
« on: April 30, 2020, 10:59:16 PM »
G'day all. I come from the South Coast of NSW. I repair all things electronically musical - guitar amps, pedals, sound desks, stereos and so on. So I have a Woodstock in the shop with no sound. Tests reveal the output MOSFET to speakers is kaput.
I haven't got any circuit diagrams or tech info to work off, so working without a net here...
What I am looking for is the specs for this 5 pin output MOSFET - yeah, no markings on the bad boy!
Really flying without instruments!
Any ideas?
Thanks  :tu:

Pages: [1]