Welcome, Guest. Please login or register.

June 22, 2021, 09:19:43 AM

Login with username, password and session length

Recent Posts

 

Author Topic: Fender Stage 112 SE - Transformer wiring  (Read 424 times)

SpiralBlue

  • Chipper
  • *
  • Posts: 1
  • Chip Points: 0
    • View Profile
Fender Stage 112 SE - Transformer wiring
« on: March 08, 2021, 06:28:44 PM »
Hi all.  I was hoping to find someone with a Fender stage 112 SE that could show me a picture of the wiring points of the transformer (a picture is worth 1000 words, right?).  I had a friend bring me this amp hoping I could wire it back together.

I've been over the schematics but not really finding a related point to work with on the PC board.

Thanks in advance.

Jazz P Bass

  • Elite
  • ****
  • Posts: 294
  • Chip Points: 23
    • View Profile
Re: Fender Stage 112 SE - Transformer wiring
« Reply #1 on: March 09, 2021, 11:37:41 AM »
Where are you located ?
Are you wiring it for Domestic (110Vsc) or Export (220Vac)?

Here is the 'Domestic' layout.

Blk (CP8)and Wht (PS4) are the Primary leads from the Mains plug.
I can only surmise that the Wht wire (PS4) indicates Power Switch tab 4.

Red -Ylw- Red:  is the 45 Vac taps with Ylw being the Center Tap
CP1-CP2-CP3
Blu- Brwn- Blu is the low voltage Vac tap with Brwn being the Center Tap.
CP4-CP5-CP6

The tabs on the PCB should be clearly marked.
« Last Edit: March 09, 2021, 12:05:58 PM by Jazz P Bass »