Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Amplifier Discussion => Topic started by: ilyaa on November 26, 2017, 02:29:02 AM
hey!
any thoughts for a suitable replacement heat sink for an ampeg ss140c?
got a salvage amp here and the heat sink is just *gone!*
someone must have removed it used it for.....something???
like the one in this pic: https://gbmedia.azureedge.net/usercontent/gear/3421921/p2_uhxjnxoft_ss.jpg?maxwidth=500
i doubt ill find that part - so im thinking maybe some of you guys have thoughts on what a good material would be to use/where to get something easy to fasten on there??
Looks like two square pieces of plain old vanilla heat sink stock.
But I often find useful heat sinks in old stereo receivers from the trash.
https://www.newegg.com/Product/Product.aspx?Item=9SIA6705VF8915&ignorebbr=1&nm_mc=KNC-GoogleMKP-PC&cm_mmc=KNC-GoogleMKP-PC-_-pla-_-Accessories+-+General-_-9SIA6705VF8915&gclid=EAIaIQobChMIrIm33Inc1wIVHLXACh1pWQJUEAYYBSABEgLzUfD_BwE&gclsrc=aw.ds
http://www.heatsinkusa.com/
http://catalog.chtechnology.com/viewitems/extruded-bonded-fin-heat-sinks/extruded-heat-sinks?&plpver=10
and so on.