Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: jpm83 on July 27, 2007, 10:07:35 AM
Hi. This is my first post to this forum. I have been a member of Aron Nelson's stompbox forum for couple of years and I found this forum that way. I have allready build a ruby with bassman mods. My question is that would this kind of speakers
be good for noisy cricket http://cgi.ebay.com/ebaymotors/Bose-4-inch-speakers_W0QQitemZ200133201664QQihZ010QQcategoryZ38646QQcmdZViewItem I found pair of these from recycling center for 2,5 euros each, a while back. I couln't find any info other but what is in the link above.
Janne
I just tested them with korg px4 to old computer speaker amp. The bass wasn't massive I can tell that, but I think thats because the speakers were not in any kind of cabinet. I'm planning to do kind of 2x4" combo amp from that noisy cricket.
Would a mono jack with switch be enough to make external cabinet connection with combos own speaker mute?
(Sorry about my poor english.)
Janne
Well I got some money so I bought 8" speaker. And I found out that yes I can make an external speaker connection with internal speaker mute with mono jack with switch.
Janne
Awesome, glad to hear it worked out for you. You should post some pics of how it came out.
Thanks. I still have to do the housing to it. I will post some pics and clips when I'm done. I used my own vero layout for this and it could be found in here. http://aronnelson.com/gallery/album176/renderun5
Janne