Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Tubes and Hybrids => Topic started by: blackcorvo on February 12, 2014, 10:55:10 PM
Hello!
I wanted to share with you guys a small project I made some time ago. It's a 7-pin version of the Fender Princeton model 5C2. For this, I used a 6AQ5 power tube and a 6J6 as the preamp tube, and god some nice vintage-y sounds from it!
Here's the schematic:
http://imageshack.com/a/img855/6201/23xz.png
And here, a video demo of it:
http://youtu.be/qJVdgweHezY?t=1m
I used the alternative power supply for the final circuit, because I wasn't able to get a proper tube PT.
Cool !!!! :dbtu: :dbtu: :dbtu: