Text only | Text with Images

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Schematics and Layouts => Topic started by: dlbraly on February 17, 2019, 12:11:35 PM

Title: Frontman 212r
Post by: dlbraly on February 17, 2019, 12:11:35 PM
Hello,

I'm having trouble finding the part number to Drive / More drive switch.
S1 on the schematic.

Can you tell me the correct part number to order?

I ordered the wrong one 0028091049 online, its a little too small.

Thank you for your help and advise.
Title: Re: Frontman 212r
Post by: solderer25 on February 18, 2019, 03:00:19 PM
I had a similar problem with a switch I ordered for a Marshall amp. The pins were a slightly smaller footprint so I carefully bent them outwards to make them fit. With a little bit of fiddling I was able to line up the switch plunger with its intended hole in the front panel - job done.
Title: Re: Frontman 212r
Post by: Jazz P Bass on February 18, 2019, 07:32:54 PM
I don't believe that switch is available anymore.

Have you attempted to contact Fender?
Title: Re: Frontman 212r
Post by: dlbraly on February 19, 2019, 09:05:46 AM
Thank You,
I have not had a chance yet to call Fender to ask them.
I will let you know what I find out.
Text only | Text with Images