I have had quite a few requests for this lately, so I thought I should repost it her. Quite a usefull tool for beginners and transistor swappers....
It is still a work in progress, and any tips on other stuff to be in here is welcome. I'm working on transelating the mm drill sizes to inches for you weird Americans.
Admins, feel free to add a link to the FAQ if you feel like it.
Encyclopedalia (http://www.syndromet.com/drill.pdf)
Thank you syndromet . Very useful, especially since I seem to have lost my reference material. :tu:
www.syndromet.com/drill.pdf
Updated, if someone cares. ;)
Hi Syndromet.
Many thanks, your PDF is very useful !
Very handy, good work as usual syndromet. You've earned yourself some chip points and I've set this topic sticky.
hello, this is my first post, and wow thank you for this, very helpful and handy to have on my bench
Quote from: syndromet on February 27, 2008, 06:20:06 AM
I have had quite a few requests for this lately, so I thought I should repost it her. Quite a usefull tool for beginners and transistor swappers....
It is still a work in progress, and any tips on other stuff to be in here is welcome. I'm working on transelating the mm drill sizes to inches for you weird Americans.
Admins, feel free to add a link to the FAQ if you feel like it.
Encyclopedalia (http://www.syndromet.com/drill.pdf)
Don't sweat the translation. If I can't convert mm to inches I probably shouldn't have a drill in my hands anyway. :P
Not forgetting that mm drills seem to be cheaper than similar-sized inch ones. ;)
Not sure if the site has gone down or what, but I can't get that Encyclopedia mentioned here. :grr
Avast anti virus blocked my getting into syndromet.com claiming it's infected by a trojan.
Oh well.
Yeah, looks like the domain registration has lapsed and the site is down. If anyone has this file, please let me know and we'll host it here.
lil' bump - anyone have this??
Did anyone try the Wayback Machine?
Sent from my iPoor using Tapatalk - now Free because I'm poor
No hope with the Wayback Machine.
It saved the 404 page, only :(
I asked for the PDF on Syndromet site again. Let see if that work.
If anyone has this doc, It would be immensely appreciated here.
IF what you need is Imperial (fractional inch) drill size to mm or American #(number) to mm, no need for that exact PDF, Google is your friend.
Quote from: J M Fahey on September 22, 2015, 05:18:02 PM
IF what you need is Imperial (fractional inch) drill size to mm or American #(number) to mm, no need for that exact PDF, Google is your friend.
Well, anyway, there are a lot o pinned topics with dead links. I think it's past time for the spring clean :)
Tubes suck!
yes, Im new and looking over the posts for how too links.
Most of them are dead links.