Thanks Enzo!!! Sorry for the delayed response I was waiting on parts.
So the solution was the IC2 TDA2050 was leaking DC out Pin4. Replaced that with one from amazon. They are only 7.99 for 10 of them. Thought I would have to replace both IC1 and IC2 to get a more matched sound since this is a stereo amp. So far it sounds equal and balanced. That fixed the problems with the Power Amp board.
The zenor diode zd1 was shorted causing R38 to burn. Replacing that fixed the amp.
Once I had good sound, I found that VR3 for the clean channel is broke. I have one of those on order. The reverb seems weak as in not having much verb. I will dive in to that next and post if I find anything.
Hope this helps anyone else experiencing issues.
So the solution was the IC2 TDA2050 was leaking DC out Pin4. Replaced that with one from amazon. They are only 7.99 for 10 of them. Thought I would have to replace both IC1 and IC2 to get a more matched sound since this is a stereo amp. So far it sounds equal and balanced. That fixed the problems with the Power Amp board.
The zenor diode zd1 was shorted causing R38 to burn. Replacing that fixed the amp.
Once I had good sound, I found that VR3 for the clean channel is broke. I have one of those on order. The reverb seems weak as in not having much verb. I will dive in to that next and post if I find anything.
Hope this helps anyone else experiencing issues.