Text only | Text with Images

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => The Newcomer's Forum => Topic started by: philkop on April 18, 2017, 03:19:34 PM

Title: I'd like to add an FX Loop to my Roland JC-55
Post by: philkop on April 18, 2017, 03:19:34 PM
Hey guys. Looking for some advice on how to add an effects loop to my Roland JC-55.

I have the schematics and a picture of the guts here http://imgur.com/a/UxQ92
Title: Re: I'd like to add an FX Loop to my Roland JC-55
Post by: phatt on April 19, 2017, 07:30:57 AM
Most likely place is to break the circuit after the volume control. (VR2 output)
You could do it passive with just 2 sockets but a buffer board might be needed it some cases.
Phil.
Text only | Text with Images