Forum upgrade to SMF 2.1.2, still working on re-theming.
Started by smadin, May 24, 2008, 10:59:10 PM
QuoteYou could likely build a basic supply but swap in different mains transformers depending on the required rail voltage and VA rating. The rectifier and filter capacitor circuitry is pretty universal anyway so you only would need to rate those components for the worst-case scenario (highest rail voltage and current demand). Conversion between single- and bipolar supply of course requires a bit more planning and rewiring. Fusing should, of course, be done according to circuit but fuses are easy to swap so that's not a problem.