Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Amplifier Discussion => Topic started by: KMG on March 07, 2011, 08:30:44 AM
2x400W monitor in old (dead) ocilloscope case.
10 band EQ, active crossover, 8x bridge/paralleled LM3886`s in each channel
(http://milas.spb.ru/~kmg/files/monitor/FrontS.jpg) (http://milas.spb.ru/~kmg/files/monitor/Front.jpg) (http://milas.spb.ru/~kmg/files/monitor/SideS.jpg) (http://milas.spb.ru/~kmg/files/monitor/Side.jpg)
(http://milas.spb.ru/~kmg/files/monitor/Inside1S.jpg) (http://milas.spb.ru/~kmg/files/monitor/Inside1.jpg) (http://milas.spb.ru/~kmg/files/monitor/Inside2S.jpg) (http://milas.spb.ru/~kmg/files/monitor/Inside2.jpg)
Usage of the old computer LPT switch, as a box for 5W fet power amplifier.
There are many such boxes in offices left unused because most of new printers are USB or Ethernet.
Before:
(http://milas.spb.ru/~kmg/files/projects/fetpa/mp/IMG_1618S.JPG) (http://milas.spb.ru/~kmg/files/projects/fetpa/mp/IMG_1618.JPG)
After repainting it, adding the front and rear plates and installng PA inside:
(http://milas.spb.ru/~kmg/files/projects/fetpa/mp/IMG_1617S.JPG) (http://milas.spb.ru/~kmg/files/projects/fetpa/mp/IMG_1617.JPG)
I like the LPT switch box, although I have to say I've never seen one before. Maybe I wasn't in an office scenario early enough to be around that type of stuff lol.