Text only | Text with Images

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: hlpmusic on September 16, 2013, 04:39:34 PM

Title: speaker load mismatch
Post by: hlpmusic on September 16, 2013, 04:39:34 PM
I have an old sears XL200 amp with only a 4 ohm speaker jack. will bad things happen if i plug in a 4x12 8ohm cab?
Title: Re: speaker load mismatch
Post by: Enzo on September 16, 2013, 06:03:19 PM
Nope.
Title: Re: speaker load mismatch
Post by: hlpmusic on September 16, 2013, 07:17:35 PM
thanks for the help Enzo!
Text only | Text with Images