Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

October 05, 2022, 04:10:45 AM

Login with username, password and session length

Recent Posts

 

Inkjet printed circuit boards

Started by flester, June 07, 2020, 05:05:01 AM

Previous topic - Next topic

flester

I have not yet tried to make PCBs but this looks interesting

https://www.hackster.io/news/print-instant-circuits-from-an-inkjet-with-silver-tape-743962a056ef

Sent from my SM-A505FN using Tapatalk

** Removed duplicate posts and fixed link in original post **

Jazz P Bass

Nice.
That may be the answer to the Roland EP-7 ribbon cable failure fiasco.

joecool85

Great share, this is very exciting and would be VERY useful for home use/fabrication of prototypes!  I could print out a board that I just designed and have it put together in the same day!   :dbtu:
Life is what you make it.
Still rockin' the Dean Markley K-20X
thatraymond.com

flester

Probably expensive but should get cheaper over time

Sent from my SM-A505FN using Tapatalk


66cccfff

Also we can use lazer printers to print the toner onto a piece of "heat-transfer paper" which is, technically, the "oily" bottom layer of stickers. Print on the oily side, use a clothing iron at 200 degree centigrade without steam to melt the toner to the copper-plated raw boards, cool it down, peel the paper away, and throw the board into the solution of iron chloride.