30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
Started by TomHealey, July 11, 2012, 08:48:22 AM
Quote from: TomHealey on October 07, 2012, 05:37:20 AMYou can consider different connections as an error, but it is not in term of workability In other words, it works good and it is simplification. Tone is exactly the same (as the tonal characteristic stays, look at the attachments), the only difference is - if You turn down middle, treble and bass - you will shout down the signal, there will be no flow. In Marshall style tone stack, it is not possible because middle pot cannot be shout to the ground by the wiper, as there is no connection between wiper and bass potentiometer.If it comes to the sound, I like it as it is, but of course anyone can do any modification they like :dbtu:
Quote from: TomHealey on July 11, 2012, 08:48:22 AMHello everyone!Few days ago I've completed first pre-amp for my new project, a solid state guitar amp....Kind Regards!Tom.
Quote from: jrc4558 on March 19, 2013, 12:36:38 PMHi Tom,I noticed that the attached Fender project files are referencing my layout. I would advise not to use it. I made it a long time ago when I knew quite little about doing it properly and the resulting build was insanely hissy. Just an FYI for people who may decide to pursue it.
Quote from: Domin9797 on July 16, 2023, 04:55:18 AMAny schematics for it? Links aren working anymore