Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Schematics and Layouts => Topic started by: Szcz on March 17, 2019, 11:03:34 PM
Hi,
I'm trying to figure out how variable resistor on this scheme should be connected to it, cause I've never seen vr symbol like this before. On this scheme is Mid and Bass resistors. Can anyone explain how to do that with the actual potentiometer, cause there are just 2 pins on the scheme instead of 3 like on the Gain. Thanks
That symbol is trying to indicate that the wiper (the middle leg) gets attached to either the left or the right leg.