Next time,thanks Joe.
Aharon

I salvaged this 80VAC,CT/160VA/2A toroidal..is it ok for the amp?
40V*1.41=56V......the chip lists a max voltage of 96V.
Thanks
Aharon

I finally opened up the Backstage 110.
5X4558P in it.........I wonder if I could replace them with 4559s or other OP and make a diference,at least in the EQ sections.
Thanks for any input.
Aharon

No dice,diferent totally.
Aharon

Thanks for the reply..you are right..I will check into that,I may even be able to use the same PCBs.
Aharon

Any plans to have a project based on these chips?.
Thanks
Aharon

Like you said Joe,this is for a single LM chip........5600uF should be enough then...
Aharon

Wow......1500uF?............that's a long way from 10kuF.
I don't know..I don't know......I'll try to get the 10KuF from my supplier,if they have them at a reasonable price fine if not I'll give these a try.
Thanks RDV/JOE.
Aharon

I have some 5600uF/63V caps that fit perfectly in the PCB.....can I use them or will I be seriously underfiltered?
Thanks
Aharon

Got them today....thanks JOE !!!!!
Aharon

Hi Joe,as per conversation,I'd love a couple of PS boards or anything you can do,no problem.
Let me know where to send $2.
Thanks a lot
Aharon

Great!!
Thanks
Aharon

PS:Joe,I sent you an email regarding the PS for the LM3886

I could not tell you,I'm new to SS amps.I picked it up at a sale for $20,sounds good for practice but seems to lack "body" if you will.
I will have to plug into an external cab to see for real,you are right,at least discount the speaker as the problem.
Thanks
Aharon

Hello everybody,new guy,some may know me form Aron's forum.

What do you guys think of the Peavey Backstage 110 and any mods,tips,advice.......?
I really don't think it sounds too good,a little thin....maybe it's the speaker...........
Thanks
Aharon