Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Schematics and Layouts => Topic started by: czgunner on November 02, 2020, 06:34:35 PM
Without a schematic I'm not entirely sure what they have going on there. But one thing I can tell you, a little bit of contact cleaner (I use Deoxit) will most likely fix your issue. Put the contact cleaner onto a 1/4" plug, work it in and out a few times and try again.
If the socket is broken inside you will most likely have to replace it. I believe Fender used a similar part on many of their amps. The Champion 110 model I have uses one. If you contact Fender there is probably a part number for it. Failing that you could probably replace it with a standard stereo jack socket.