Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - pizzafrenchfry

Pages: [1]
1
Amplifier Discussion / Re: Thunderfunk with Dead Power Amp Board
« on: May 03, 2021, 07:29:04 PM »
Like most of these modules, the output is balanced. That means you can't ground one side, and you shouldn't use phone type plugs because there will be dangerous Voltages on the metal shells.

There is no good way to drop Voltages to what you need. You can burn several hundred watts via analog means, or build a switching regulator :(

Good point, that would be a big drawback. I've heard these ICE units are used in several commercial bass amps. I wonder how it's implemented.

I was considering using something like the MOSFET voltage reducer attached. There is a large heatsink in the chassis already and a fan. Would require a large power mosfet in the several hundred+ watt range, but I believe this would work.

2
Amplifier Discussion / Thunderfunk with Dead Power Amp Board
« on: May 03, 2021, 05:27:54 PM »
Hello all,

First post on this forum. I have a decent background in Tube amp repair, but am just really digging into transistors.

I have a Thunderfunk bass amp where the power amp board has failed and immolated itself beyond repair. The amp is fairly obscure and no replacement boards, service documentation, or schematics are available.

The power supply and preamp and working, so I'm thinking this may be a good candidate to receive a 'drop in' Class D power amp board.

The amp was originally 550W into 4Ohms, so I've been looking at  the ICE 500ASP which has similar specs.

The supply in the amp is +/-94VDC and +/-24VDC, for the ICE module I need 42-85VDC  (nominal 75v) and +/-12VDC.

For the +/-12VDC line I was thinking of using a DC/DC converter into some LM7812/7912 regulators.

What would be a good way to drop 15-20V or so or so on the B+?

Anything else I should consider that I may have missed?

https://www.parts-express.com/pedocs/manuals/326-100--icepower-500a-class-d-amp-module-1x500w-data-sheet.pdf

Pages: [1]