Print Page - Marshall G50R CD line out level

Title: Marshall G50R CD line out level
Post by: tomcat on November 23, 2008, 08:31:41 AM

Question from a newbie! Have G50R CD and use it at relatively low level with guitar sound primarily from house PA. At the volume I use the amp I find the line out level too low to feed the mixer (Excess noise etc) Does anyone know where I could get my hands on a schematic for this amp so I can look at modifying this part of the circuit. Obviously a lot easier with a schematic than "bush-ranging" without.
Cheers,
Tomcat

Title: Re: Marshall G50R CD line out level
Post by: teemuk on November 23, 2008, 11:48:17 AM

http://www.about-guitar-amps.com/free_guitar_amplifier_schematics.html

Title: Re: Marshall G50R CD line out level
Post by: tomcat on November 23, 2008, 09:12:53 PM

Thanks for the very quick response from teemuk. Looks like just what I needed and also introduced me to what looks like a very useful site in http://www.about-guitar-amps.com

Thanks again.
Tomcat

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => The Newcomer's Forum => Topic started by: tomcat on November 23, 2008, 08:31:41 AM