Hello everyone,
excuse me for disturbing you, but I need your help.
I have a vox ac30ss be repaired, because the inputs and footswitch jacks are detached from the motherboard ..
any of you who have the same amplifier could send the detailed photos on the connections of the inputs and footswitch jack vox ac30ss to repair my to its original condition?
I thank you in advance for your reply and help.
Doubt anybody has one, they are not very common, but you might post a couple clean sharp pictures of yours (no cellphone pictures, please) and we might see what's wrong and suggest a solution.
Also google and post here the schematic, so we all talk about the same.
hello J M Fahey,
thank you for having responded to my call for help ..
at the moment I do not have the ability to send photos,
I find a way to make real photos card these days ..
my vox ac30ss has inputs jacks and footswitch disconnected,
however I have found on the internet a vox ac30ss as mine but the picture is not clear how they are soldered on the motherboard wires input jack:
www.google.com/imgres?imgurl=http://www.spheremusic.com/userimages/Img11334.jpg&imgrefurl=http://www.spheremusic.com/Bargaindtl.asp?Item%3D11334&h=885&w=1893&tbnid=VUjdOti01oyHSM:&zoom=1&docid=4VZrKFbFS0aW_M&ei=NgtSVeDSBoHjUoL9gcAM&tbm=isch&ved=0CCIQMygGMAY
Found a schematic here. >> http://www.korguk.com/voxcircuits/circuits/ac30ss.jpg (http://www.korguk.com/voxcircuits/circuits/ac30ss.jpg)
Dunno if it's the correct one.
HTH
That has to be the correct schematic, not many versions of the SS version made. Also, North Coast Music sells many service manuals for vintage vox amps. They have this version in their databases and it is under "DAAC-30SS - Dallas Arbiter era all transistorized AC-30 amp, mid 1970s " on the web page.
http://www.voxshowroom.com/northcoast/VAP/sch_uk_ac30.html (http://www.voxshowroom.com/northcoast/VAP/sch_uk_ac30.html)
You could send them an email asking if that service manual includes the board layouts. For $5.80 it might be worth it if the service manual has the layout, which will help you figure out where the wires are installed. First email them and ask since not all of the service manuals have a board layout print.
hello galaxiex DrGonz78,
thanks to you for the answer ..
ok I try to see if the link you can buy the complete setup because the pattern that pointed me galaxiex not complete ..