Text only | Text with Images

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: Cipp on January 15, 2017, 04:35:15 AM

Title: Does anyone have the Blackstar Fly 3 schematic?
Post by: Cipp on January 15, 2017, 04:35:15 AM
Does anyone have the schematic for the Blackstar Fly 3 mini amp?
I'm looking to make it sound a little brighter and don't know where to start.
Thanks
Title: Re: Does anyone have the Blackstar Fly 3 schematic?
Post by: Enzo on January 15, 2017, 07:09:46 PM
A brighter speaker will probably have more effect than circuit modifications.
Title: Re: Does anyone have the Blackstar Fly 3 schematic?
Post by: Cipp on January 15, 2017, 08:11:23 PM
The speaker seems fine for the job as the output from the mp3 line input sounds pretty good.
Changing the speaker would affect the sound from the mp3, not what I'm after.
Thanks for the suggestion.

The point is that the amp sounds fine at low gain but gets too dark past the midpoint.
On another note, I'd fancy a full tone stack EQ settings (bass, mid, treble). I'll see if I can find room for the pots (similar to the delay volume pot).
Text only | Text with Images