Welcome, Guest. Please login or register.

September 26, 2021, 02:16:14 PM

Login with username, password and session length

Recent Posts

 

Author Topic: Baldwin C1 input jack socket query  (Read 572 times)

rogerandout

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 1
    • View Profile
Baldwin C1 input jack socket query
« on: January 31, 2021, 03:05:14 PM »
Hi all, I have one of these amps in for service and noticed that on input 1 jack socket on both channels, that the 'ring' is connected to the PSU and has about 33V on it - what's the idea?

many thanks







« Last Edit: January 31, 2021, 05:57:39 PM by rogerandout »

Loudthud

  • Elite
  • ****
  • Posts: 284
  • Chip Points: 40
    • View Profile
Re: Baldwin C1 input jack socket query
« Reply #1 on: January 31, 2021, 06:44:03 PM »
Some amps use a scheme like this to detect when something is plugged in to mute the channel when nothing is plugged in. On this amp, it looks like they are providing power to some kind of active guitar or perhaps an accordion.  A normal phone plug will short it to ground, but it will send a jolt to your guitar if you plug in while the amp is on. Probably a good idea to disconnect it.

rogerandout

  • Chipper
  • *
  • Posts: 2
  • Chip Points: 1
    • View Profile
Re: Baldwin C1 input jack socket query
« Reply #2 on: January 31, 2021, 07:12:38 PM »
Thanks for the reply, yes I wondered if it was as you suggest, cant be a good idea putting 33V into you 59' Burst PAFs  :o

I have disconnected it   :tu: