Welcome, Guest. Please login or register.

October 21, 2021, 08:38:20 AM

Login with username, password and session length

Recent Posts


Author Topic: Pignose amp?  (Read 960 times)


  • Chipper
  • *
  • Posts: 2
  • Chip Points: 0
    • View Profile
Pignose amp?
« on: November 02, 2020, 06:34:35 PM »
Anybody have anything for this? It’s the little one, 7-100 I think?
Anyway my input jack drops out when I wiggle the cable. I tried calling Pignose and they have not called me back. The jack doesn’t look normal to me.
I emailed a few places and they don’t recognize it to replace it.


  • SSGuitar Admin
  • Legendary
  • ******
  • Posts: 3424
  • Chip Points: 994
  • SSG Creator
    • View Profile
    • thatraymond.com
Re: Pignose amp?
« Reply #1 on: November 03, 2020, 11:41:45 AM »
Without a schematic I'm not entirely sure what they have going on there.  But one thing I can tell you, a little bit of contact cleaner (I use Deoxit) will most likely fix your issue.  Put the contact cleaner onto a 1/4" plug, work it in and out a few times and try again.
Life is what you make it.
Still rockin' the Dean Markley K-20X


  • Regular
  • **
  • Posts: 17
  • Chip Points: 1
    • View Profile
Re: Pignose amp?
« Reply #2 on: November 03, 2020, 05:35:34 PM »
If the socket is broken inside you will most likely have to replace it. I believe Fender used a similar part on many of their amps. The Champion 110 model I have uses one. If you contact Fender there is probably a part number for it. Failing that you could probably replace it with a standard stereo jack socket.