Welcome, Guest. Please login or register.

October 24, 2021, 02:16:53 AM

Login with username, password and session length

Recent Posts


Author Topic: Hybrid tube amps work!  (Read 5499 times)


  • Regular
  • **
  • Posts: 13
  • Chip Points: 0
    • View Profile
Hybrid tube amps work!
« on: June 05, 2009, 03:30:20 PM »
I have bought a miniature tube buffer after being inspired by this youtube video: http://www.youtube.com/watch?v=YsRhIFJzFug&feature=channel_page

It is built around a 6Z1P miniature pentode with wire leads. The pentode is connected as a cathode follower. This little thing is quite magical - before the amp for clean or distorted sounds, or in the effect loop of a ss preamp (Marshall 9004). It gives a nice tubey feeling to the tone. So I strongly believe, a great hybrid tube amp can be built. If a mixed mode feedback power amp is used along with a muti-stage distortion preamp, then it needs just a preamp tube in the signal path to get satisfying guitar tones for the hi-gain stuff and maybe for other uses as well.

A Marshall Valvestate has these features, but it fails in the distortion-generating stage - there are loads of distortion pedals that can do distortion much better.