Well hi there folks!
Ive been through all the pages in the web and have found nothing that fits my question!
First of all, is there someone who has a schematic for that pathfinder? and second one, i want to add a serial fx loop (cause it would be the easiest, right). I feel the need of getting some crunchy reverb sounds out of it and reverb to the input in OD channel sucks. This is how it all started:
After playing around with the idea of diy´in a spring reverb ( yes it works: old G-String twisted round an aluminum coat-hanger and u get the spring. Then u need an walkman phones and glue the "spring" to the cones of the phones. Some plug adapter and there u go!) i needed an amplifier for my reverb input, cause its too silent in the guitar jack input. My conclusion was: I need an stereo jack as a combined send-return plug in my tiny Vox amp similar to the one in my Crate GX65 right between the preamp and poweramp... So i need infos on where i have to solder the stuff !?!
I cant imagine that its just like daisychaining a two cables between the preamp signal out and the poweramp in? I saw some specs for adding a tube driven fxloop, but i realy want just a simple as possible SOLIDSTATE fxloop.MAYBE (if it aint that hard) in parallel with a trimpot.
So any help out there?
Greets,
Snyder80
PS: are there some known mods (speaker change doesnt count
) for the OD channel to get it more Matchless DC30 or VOX AC30 britpop like??
Ive been through all the pages in the web and have found nothing that fits my question!
First of all, is there someone who has a schematic for that pathfinder? and second one, i want to add a serial fx loop (cause it would be the easiest, right). I feel the need of getting some crunchy reverb sounds out of it and reverb to the input in OD channel sucks. This is how it all started:
After playing around with the idea of diy´in a spring reverb ( yes it works: old G-String twisted round an aluminum coat-hanger and u get the spring. Then u need an walkman phones and glue the "spring" to the cones of the phones. Some plug adapter and there u go!) i needed an amplifier for my reverb input, cause its too silent in the guitar jack input. My conclusion was: I need an stereo jack as a combined send-return plug in my tiny Vox amp similar to the one in my Crate GX65 right between the preamp and poweramp... So i need infos on where i have to solder the stuff !?!
I cant imagine that its just like daisychaining a two cables between the preamp signal out and the poweramp in? I saw some specs for adding a tube driven fxloop, but i realy want just a simple as possible SOLIDSTATE fxloop.MAYBE (if it aint that hard) in parallel with a trimpot.
So any help out there?
Greets,
Snyder80
PS: are there some known mods (speaker change doesnt count
) for the OD channel to get it more Matchless DC30 or VOX AC30 britpop like??