Do you have LED lighting? Or florescent? Those things can be noisy.
30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.Show posts Menu
Quote from: mensur on May 19, 2018, 04:03:26 PMThanks!
From Marshall website:
Custom (4Ω, 50w)
Quote from: g1 on February 13, 2018, 01:48:12 PMThanks again g1!
This guy has it, you can contact him and see if he'll share.
Otherwise, musicparts has it for $20.
Quote from: g1 on February 12, 2018, 05:16:53 PMThanks g1! But that's the tube version... I'm looking for the SS version... thanks anyways !
The service manual only gives acoustic part numbers in the parts list, but you can probably find out elsewhere what the generic subs are.
Quote from: PMc on January 19, 2018, 07:38:12 PMKP Components !
So are these chips only available from China now? Can't seem to track down a North American supplier. Any thoughts?
Sent from my P01Z using Tapatalk
Quote from: joecool85 on March 05, 2009, 06:33:05 PMAncient thread, but I second that thought. I'm about 100 pages in, Teemu's book is terrific.Quote from: J M Fahey on March 05, 2009, 05:17:40 PM
>>and thank you for your book. You should recieve some kind of >>ssguitar.com medal... (2)
One of the very many reasons he is a mod here
Quote from: Enzo on January 17, 2018, 10:28:02 PMLol clearly. Thanks!
50k versus 47k? Absolutely nothing different.
50k versus 47 ohms? All the difference in the world.
Quote from: flester on December 02, 2017, 02:57:56 PMI'm making my first foray into DIY solid state amps with this kit. Can anyone tell me what happens if I use a 50k log pot instead of a 47 ?Quote from: J M Fahey on May 29, 2016, 06:48:11 AMOK here is plan B. I've been playing around with the Lm386 opamp and decided it might suit my little enclosure better than the TDA2003. I thought id use 2 of the TDA2003 modules with each one driving a 4" car speaker in some sort of cabinet. Maybe shaped like the Roland Street Cube https://m.thomann.de/ie/roland_cube_street_bk.htm
You can't reduce gain very much, I guess minimum is around 20X , because it becomes unstable.
So reduce R2/R1 ratio to about 20:1 but not less, any ectra reduction myst be input padding."Which is not all bad, you can add a passive tone conrol which will be lossy anyway.
Sent from my SM-G935F using Tapatalk