Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Software => Topic started by: CrisBonis on September 19, 2015, 06:36:57 AM

Title: THE IMPULSER • V 1.6 (UPDATED)
Post by: CrisBonis on September 19, 2015, 06:36:57 AM
UPDATED V1.6


(http://www.bonisaudio.com/images/impulseimg.jpg)
{ THE IMPULSER • V 1.5 • SINGLE IMPULSE AUDIO GENERATOR }
The Impulser is a single impulse audio generator, the impulse is about 1 KHz - 1.40 Vrms @ 600Ohm, (SINE - SQUARE - SAW- TRIANGLE) before and after the impulse is present a 'silence' about 0.5 seconds.
http://www.bonisaudio.com/soft_impulser.html (http://www.bonisaudio.com/soft_impulser.html)

ED:
Added '10 Sweep' function
Title: Re: THE IMPULSER • V 1.2
Post by: CrisBonis on October 02, 2015, 03:57:48 PM
http://www.bonisaudio.com/soft_impulser.html

Update V1.4
Title: Re: THE IMPULSER • V 1.5
Post by: CrisBonis on October 08, 2015, 10:58:38 AM
update V1.5
IMD TEST
Title: Re: THE IMPULSER • V 1.6 (UPDATED)
Post by: CrisBonis on October 21, 2015, 02:37:15 PM
The Impulser V1.64 Update - Fixed all output signal to 600 Ohm @ 1.228 Vrms
http://www.bonisaudio.com/soft_impulser.html (http://www.bonisaudio.com/soft_impulser.html)
Title: Re: THE IMPULSER • V 1.6 (UPDATED)
Post by: CrisBonis on November 05, 2015, 05:00:07 AM
The impulser V1.68

(http://www.bonisaudio.com/images/impulseimg.jpg)

http://www.bonisaudio.com/soft_impulser.html (http://"http://www.bonisaudio.com/soft_impulser.html")


Added a GAIN TEST...