Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: wikwox on February 06, 2010, 02:38:12 PM

Title: Fender Stage Lead Pots
Post by: wikwox on February 06, 2010, 02:38:12 PM
Hi, first post here. Have an old (1986) solid state Fender Stage Lead in need of a new pot for the treble on the amps distortion side. I have been told Fender no longer stocks this pot( part# might be 0028576000). I would like to order one from Mouser but am not sure of the pots values. Onlt writing on the pot is 15c-50k, and upside down U (sigma?) then jp. Its a D solid D shaft one half inch long. Shaft was pulled out of the backing plate, I pushed it in and reassembled it but I would prefer a new one. Thanks!
Title: Re: Fender Stage Lead Pots
Post by: Enzo on February 07, 2010, 01:53:40 AM
You can look for a 50k reverse audio pot at Mouser, not sure you will find a D shaft.

Try www.tubesandmore.com for a chance.  They have a number of D-shaft Fender pots.  You might adapt and use a linear instead.   And try www.fenderparts.com see if they have it.

Always a good idea to CALL these places rather than email.

I see 019712 as a part number.

028576 is a 250k log pot.