Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

March 28, 2024, 10:51:32 AM

Login with username, password and session length

Recent Posts

 

wiring on this,.pls help me

Started by nikkram17, May 28, 2014, 07:43:09 AM

Previous topic - Next topic

Roly

Well I'm still a bit confused because you haven't followed the layout exactly, in particular there seem to be some ground links missing to the left of the chip, and you seem to have added a couple of extra rows, specifically "E" and "Z", so it's a bit hard to work out what is going on.

Can we have a pic of the copper side please?  In the meantime you could check with your ohmmeter between battery negative and all the places it is supposed to go just to be sure they are all actually grounded (e.g. pin 3).
If you say theory and practice don't agree you haven't applied enough theory.

nikkram17

actually sir i didnt add an entire row,.i just put some wire to transfer my connection for the speakers output and gain knobs since im out of spot to solder them,.im not using a stripboard,.its a perfboard,.

regarding the ohmeter,iv checked it and its properly grounded,. sorry for the confusion sir,. hehe