Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Schematics and Layouts => Topic started by: n9voc on January 28, 2008, 09:11:23 PM
Ive attached a schematic of a little combiner box I made up for use with interfacing a guitar or other mono input amplifier with a stereo, dvd, headphone or satellite receiver. It can combine the signals through the RCA jacks to either a mono or stereo 1/4" jack. The resistors in line assist with the mix, as well as keep a certain level of separtion between the channels. The can be anything from about 32 ohms to about 100 ohms. To interface with a 1/8" headphone, I picked up a 1/8" stereo to twin RCA plug cable from radio shack.
I've attached pictures of the outside and innards of my "combiner/converter". I bought the tin of candy for about $0.50 - candy was good, but I bought several just for the tin box!