Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

December 08, 2024, 01:35:12 PM

Login with username, password and session length

Recent Posts

 

Help Diagnosing a Yamaha B100-115III Bass Amp

Started by CarverZ, July 24, 2015, 06:32:15 PM

Previous topic - Next topic

GregbErepair

Hi. I'm a new member having the same problem with the same amp. Can someone please point out the diode that was replaced in one of the photos similar to the photo with the arrow pointing to the resistor. Thanks

g1

According to the board layout, it should be squeezed in between the relay and the big cap, probably under the wire.
You cannot view this attachment.

GregbErepair

Quote from: g1 on November 05, 2024, 06:35:36 PMAccording to the board layout, it should be squeezed in between the relay and the big cap, probably under the wire.
You cannot view this attachment.
Thank you. Will give it a look later. Now I also know where the relay is. Much appreciated.