Print Page - marshall ms-2 schematic

Title: marshall ms-2 schematic
Post by: autir on March 23, 2010, 09:53:18 PM

I hope I write in the proper subforum.

Does anyone have a schematic of the Marshall MS-2? I have searched everywhere in the site, including the links to other sites, but found nothing.

Title: Re: marshall ms-2 schematic
Post by: pyromaniac_ on March 24, 2010, 03:18:30 AM

Marshall MS-2 was wildly discussed at diyAudio.com forum a while ago I remember. The only time I've seen that schematic on the internet, so I saved it then. Don't know if I'm allowed to post it here, so try to stop me.

...btw because the chip KIA6123, used in MS-2, turned out to be hard to find and also got bad feedback. Some guy at diyAudio.com came up with a MS-2 adapted for LM386. I don't remember if it ever got verified, but I post it here anyway.

Title: Re: marshall ms-2 schematic
Post by: autir on March 25, 2010, 10:03:09 AM

Thanks :-)

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => The Newcomer's Forum => Topic started by: autir on March 23, 2010, 09:53:18 PM