Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - J0K3RX

#1
The Newcomer's Forum / Re: Randall RH 100 amp head issue
February 17, 2013, 05:27:50 PM
Quote from: ShaneShreds on February 17, 2013, 02:33:32 PM
Hey guys, this is obviously my first time posting on yall's forums, but I am having a big problem with my Randall amp head right now and would be appreciative beyond measure if I could get a fix for it. I have a randall rh 100 amp head and one day I went to turn it on and jam as usual and when I hit the switch  it was as if the sound started to slowly dim out and it blew the fuse. So my next step in trouble shooting it myself was, practically, just putting another fuse in the power switch. Well the same thing happened and I cant seem to find out what is happening exactly thanks a plenty to who ever gets back to me guys. :dbtu:

Might have a blown component? I would examine the board for any obvious place that look like they have been exposed to heat or burnt components etc... I would also check for cracked solder joints especially around the power amp section, that is very common... You can run from your effects send output direct into something and see if you get any signal... this will just be coming from your preamp section, if you get signal then you know it's not anything in the preamp section.  Check all of the solder joints around Q8 thru Q16.
#2
Preamps and Effects / Re: suhr riot
February 15, 2013, 11:30:19 PM
I know this is an old post but just wanted to share ;) Heads up to anybody who built the Riot clones, you all must have noticed that they didn't sound like the real Riot!? Anyway, this guy traced it 100% and got it right! Go about half way down the page to the posts by MarkGor. Also, Rcutoms made a good layout, works perfect!

http://www.freestompboxes.org/viewtopic.php?f=7&t=10133&start=240