Text only | Text with Images

Solid State Guitar Amp Forum | DIY Guitar Amplifiers

Solid State Amplifiers => Amplifier Discussion => Topic started by: quazcha on November 11, 2010, 04:49:51 AM

Title: Line 6 Spider III 75w where can I get parts- broken AMP MODELS Pot
Post by: quazcha on November 11, 2010, 04:49:51 AM
Hello all,
my son was nice enough to sheer off the AMP MODELS pot for me. Is it a pot or rotary encoder?- I havent taken it apart yet- it still works if you reach in the hole and turn the shaft. Anybody here a line 6 dealer that would sell me parts I need the Pot and the corresponding knob. thanks, contact me at quazcha@yahoo.com
Title: Re: Line 6 Spider III 75w where can I get parts- broken AMP MODELS Pot
Post by: J M Fahey on November 11, 2010, 08:50:22 AM
Hi quazcha.
Post this same question in: http://music-electronics-forum.com/ , there are many "official service" there which may answer you.
Good luck.
Text only | Text with Images