Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

November 09, 2024, 04:50:33 AM

Login with username, password and session length

Recent Posts

 

marshall G30R CD clean channel volume problem

Started by lordraptor1, February 06, 2020, 06:22:04 PM

Previous topic - Next topic

Enzo

Op amps don't fail making crosstalk, they simply amplify what comes to them.

It really doesn't matter where the controls are on the panel for the most part.  But maybe...

Crosstalk isn't a failure of anything.  Well other than the design.  Crosstalk simply means some part of the circuit is sensitive enough to pick up the signal from some other part.

An example.  Some poorly designed PA mixers, you can plug a hot signal into channel 1 and if you turn up channel 2, some of channel 1 will be leaking into it.  This is because the two channels are close enough together electrically.  it isn't something you can "fix".