30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
Started by Dino Boreanaz, November 25, 2018, 07:24:54 PM
Quote from: 66cccfff on November 28, 2018, 08:44:51 AMIf your amp has 2x8ohm speaker outputs which are paralleled, it will be certainly OK to use 4ohm load.
Quote from: g1 on November 28, 2018, 11:05:30 PMThat is the case here. Above the speaker jacks it says 8 ohms.Below the jacks, it says "Do not use loudspeakers of less than 8 ohms. IE. - 1 x 8 ohm or 2 x 16 ohm."