Welcome to Solid State Guitar Amp Forum | DIY Guitar Amplifiers. Please login or sign up.

March 28, 2024, 04:12:12 PM

Login with username, password and session length

Recent Posts

 

2x11W stereo amplifier [TDA7360]

Started by Leopard, October 19, 2009, 12:40:27 PM

Previous topic - Next topic

Leopard

Hi all!

First of all, here's a link to the TDA7360 PDF: http://www.datasheetcatalog.org/datasheet/stmicroelectronics/1499.pdf

I've tried to make my own PCB layout now. I made a breadboard version which is completed with pretty much the same schematic, and now I would like to take this project to the next step.

List of parts in my layout:

C1 = Input capacitor, value 220nF
C2 = see C1
C3 = Output capacitor, value 2200uF 16V, Low ESR
C4 = see C3
C5 = Power filtering capacitor, value 3300uF 25V, Low ESR
C6 = Stand-by capacitor, value 47uF 25V
C7 = Power filtering capacitor, value 680nF
C8 = see C7
C9 = SVR capacitor, value 220uF 25V, Low ESR
J1 = metal jumper which connects C9 and pin 7 of TDA7360

Any comments on the chip itself, the capacitor values etc. ideas are welcome. ;)