30% off all Honey Amp kits, check it out at https://store.ssguitar.com !
Started by Aleksandar, December 04, 2010, 06:46:01 AM
Quote from: J M Fahey on December 06, 2010, 08:10:51 PMPS: it even admits the excellent Phatt's tone control instead of the original one.
Quote from: J M Fahey on December 11, 2010, 11:05:44 AMThey are protection diodes as correctly stated above, but they are not grounded, please check that the "free" end goes to either +15V or -15V; so the actual threshold is a whopping 15.7 V .They will not clip a guitar signal, they are there to protect the input op amp from those guys who enjoy plugging a speaker out into another amp's input.You say those don't exist?I know a few !!!! :duhThey do not even be too :loco , most people think that headphone out can be used as line out.Definitely not, most bean counting designers save a 0.001 cent resistor and headphone outs slam the full speaker voltage (think 16 to 40 V RMS) into high impedance loads (pre inputs).