Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => Schematics and Layouts => Topic started by: Douglas on October 08, 2016, 11:31:30 AM
This is the first time I have posted on any forum, so I hope I'm doing this properly. I have a Marshall G30RCD amp that needs new pots but I don't have a schematic diagram to verify what the pot values should be. Does anyone have a schematic for this little amp?
Thanks in advance.
There is a thread here with the exact same problem, replacing pots. The schematic was posted on that thread by Enzo and there is good info on the pots too.
http://www.ssguitar.com/index.php?topic=3132.0
Thanks so much.
Douglas
Hi guys, I am looking for Park Marshall G25r schematic, am trying to fix my combo but without the schematic it has proved difficult. May u please assist. Thanks.