Solid State Guitar Amp Forum | DIY Guitar Amplifiers
Solid State Amplifiers => The Newcomer's Forum => Topic started by: saturated on August 28, 2023, 09:42:23 PM
finally unpacked some of this stuff
IMG_20230828_202636059.jpg
sawtooth
IMG_20230828_202623672.jpg
square
IMG_20230828_202612977.jpg
dc offset moves but doesnt hold
anyhow feelin pretty good even though i feel like i parachuted into another planet
have no idea whatsoever about these controls or adjustments
should be fun
IMG_20230828_203315205.jpg
IMG_20230828_203341573.jpg
cant believe that hickock works...awesome the dc offset moves the trace but falls back
I wanted to fix my heathkit scope and i (we) will in time but i ordered another one so i could get on with my journey here which is happening at a snails pace
gonna have to do a lot of reading and watching videos
Just above the probe connector is a switch for AC or DC coupling. In the pic, you have it set to AC. That is why it will not hold the DC offset, you need it to be set for DC coupling.
It is not that often that I use DC coupling on my scope, but useful for some things. Generally I use my meter for DC measurement.