Solid State Amplifiers > The Newcomer's Forum

Amp problem

(1/4) > >>

Uprightbassjunkie:
My amp is getting power, I can see the fan turn on by the transistors but I'm not getting power to the board with the input and potentiometers are. I'm thinking it's the power connection to that board. What should i look for with a multimeter and so on. Thanks

phatt:
A NAME might help?
a model even.

Whatever it is see if you can find a schematic on the net as that will speed up replies.
Cheers, Phil.

Uprightbassjunkie:
Trace Elliot gp12 Smx..... The model number is 122hsmx. I'll try to find a schematic.

Uprightbassjunkie:
I couldn't find the exact schematic but I found one close. I measured to see if I'm getting power to my preamp board and I'm not, the connector to the preamp is coming from the transformer. Any suggestions?

J M Fahey:
Post a link so we all speak about the same.

Navigation

[0] Message Index

[#] Next page